Faucet & Fixture Installation in Napa, CA

Professional faucet installation in Napa costs $200–$500 for labor, not including the faucet itself. Faucet repair (fixing leaks, replacing cartridges) typically costs $100–$200.

A straightforward faucet swap where the new faucet matches the existing hole configuration is a manageable DIY project taking 1–2 hours. However, if you need to modify plumbing lines, change hole configurations, or work with older supply valves that may break during removal, hiring a professional prevents costly water damage.

A professional faucet replacement typically takes 1–2 hours. Kitchen faucets with sprayers or soap dispensers may take slightly longer. If corroded supply lines or shut-off valves need replacing (common in older Napa homes), add 30–60 minutes for that additional work.

We recommend Moen, Delta, and Kohler for the best combination of quality, warranty, and availability of replacement parts. Moen and Delta both offer lifetime warranties against drips and leaks. For budget-friendly options, Pfister and Glacier Bay provide good value. We can install any brand the homeowner selects.

Faucet drips are usually caused by worn O-rings, cartridges, or valve seats. A faucet dripping at one drip per second wastes over 3,000 gallons of water per year — adding $30–$50 to your Napa water bill annually. Cartridge replacement ($100–$200 professionally) stops the drip and pays for itself within a couple of years.

Repair makes sense if the faucet is less than 10 years old and the issue is a simple cartridge, O-ring, or valve seat replacement ($100–$200). Replace if the faucet is corroded, has multiple failing components, or the repair cost exceeds 50% of a new faucet. Faucet styles also change — a new fixture can update your kitchen or bathroom's look.

We install kitchen faucets (pull-down, pull-out, and standard), bathroom sink faucets (single-hole, widespread, centerset), shower fixtures and valves, bathtub faucets and spouts, outdoor spigots and hose bibs, and utility sink faucets. We work with all brands and handle both standard and custom installations.

Yes, we install touchless and motion-sensor faucets from Moen, Delta, and Kohler. These faucets require a power source — either batteries or an AC adapter connected under the sink. Installation takes 1.5–2.5 hours and includes setting up the sensor and calibrating the activation range.

Consider the number of mounting holes in your sink, the faucet height (important for large pots in kitchens), finish that matches other hardware, and features like pull-down sprayers or touchless activation. We recommend visiting a showroom to test feel and spray patterns before purchasing. Bring photos of your sink and measurements.